Double DIN Head Units That Fit the Honda Pilot

Swapping the radio in a Honda Pilot is one of the easier upgrades in car audio: standard double DIN opening, plug-in harness adapters, and dash kits that make the result look stock. Start with one of the universal units below, then grab the install parts listed under it.

Some links on this page are affiliate links — see our affiliate disclosure.

Fit type: standard double DIN + dash kit. We don't currently list a custom-molded unit for the Pilot; the proven route is a universal double DIN stereo with a Pilot-specific dash installation kit (listed under “What else you need” below).

Universal double DIN units for the Honda Pilot

DasaitaDouble DIN

Dasaita Android13 Car Stereo for Universal 2 Din 13.1" Wireless Carplay & Android Auto

Screen
13.1"
OS
Android 13
CarPlay
Yes
Android Auto
Yes
RAM/ROM
6G+64G
Price
~$538

What else you need for the install

A universal unit becomes a factory-look install with the right supporting parts. For the Honda Pilot that means:

Diagram of a complete double DIN installation. Mechanically: dash opening, then dash kit brackets, then the head unit, then the trim facade. Electrically: the factory radio plug, antenna plug, steering wheel buttons and reverse signal each reach the radio through their own vehicle-specific adapter.

Open the diagram full size

The head unit is the generic part. Everything that makes it fit aHonda Pilot is in the middle column.
  • Dash installation kitessential

    Adapts a standard double DIN chassis to the Honda Pilot dash opening for a factory-look fit.

    Shop on Amazon
  • Wiring harness adapteressential

    Plugs between the new stereo and the factory Honda connector — no cutting the car's wiring.

    Shop on Amazon
  • Radio antenna adapteressential

    Connects the factory Honda antenna plug to the standard motorola jack most aftermarket units use.

    Shop on Amazon
  • Steering wheel control interface

    Keeps your steering wheel volume and track buttons working with the new unit.

    Shop on Amazon
  • Backup camera

    Nearly every unit here has a rear camera input — adding a camera during the install costs little extra effort.

    Shop on Amazon

Honda Pilot head unit FAQ

Will a double DIN head unit fit my Honda Pilot?

Yes — the Honda Pilot takes a standard double DIN (4-inch tall) chassis with the correct dash installation kit. The kit fills the factory opening so the new stereo looks factory-installed.

Do I need a dash kit for a Honda Pilot stereo upgrade?

Yes — a vehicle-specific dash kit is the one part you shouldn't skip. It adapts the Pilot dash opening to the standard double DIN chassis and usually costs $15–$50.

Will I keep my steering wheel controls in the Pilot?

In most cases yes, with a steering wheel control interface module wired between the car and the new unit. Budget roughly $30–$60 for it.

What screen sizes are available for the Honda Pilot?

Units listed for the Honda Pilot come with 7", 9", 10.1", 13.1" displays. Larger screens on custom-fit units are shaped to the dash, so a bigger display doesn't necessarily mean cutting or trimming.

Can I install a head unit in the Pilot myself?

A Pilot head unit swap is a common DIY job: trim removal tools, a screwdriver set, and 1–2 hours are typically enough. The wiring is plug-in when you use the right harness adapter and dash kit. If you're not comfortable removing dash trim, any car audio shop can do the physical install for a modest fee.