Double DIN Head Units That Fit the Kia Seltos

There's no shortage of stereo choices for a Kia Seltos — because it takes a standard double DIN chassis, the whole aftermarket is open to you. The trick is the supporting hardware: a Seltos dash kit and wiring harness turn a generic unit into a factory-look install. Here's what we'd pick.

Some links on this page are affiliate links — see our affiliate disclosure.

Fit type: standard double DIN + dash kit. We don't currently list a custom-molded unit for the Seltos; the proven route is a universal double DIN stereo with a Seltos-specific dash installation kit (listed under “What else you need” below).

Universal double DIN units for the Kia Seltos

DasaitaDouble DIN

Dasaita Android13 Car Stereo for Universal 2 Din 13.1" Wireless Carplay & Android Auto

Screen
13.1"
OS
Android 13
CarPlay
Yes
Android Auto
Yes
RAM/ROM
6G+64G
Price
~$538
Check price on AmazonManufacturer page

What else you need for the install

A universal unit becomes a factory-look install with the right supporting parts. For the Kia Seltos that means:

Diagram of a complete double DIN installation. Mechanically: dash opening, then dash kit brackets, then the head unit, then the trim facade. Electrically: the factory radio plug, antenna plug, steering wheel buttons and reverse signal each reach the radio through their own vehicle-specific adapter.

Open the diagram full size

The head unit is the generic part. Everything that makes it fit aKia Seltos is in the middle column.
  • Dash installation kitessential

    Adapts a standard double DIN chassis to the Kia Seltos dash opening for a factory-look fit.

    Shop on Amazon
  • Wiring harness adapteressential

    Plugs between the new stereo and the factory Kia connector — no cutting the car's wiring.

    Shop on Amazon
  • Radio antenna adapteressential

    Connects the factory Kia antenna plug to the standard motorola jack most aftermarket units use.

    Shop on Amazon
  • Steering wheel control interface

    Keeps your steering wheel volume and track buttons working with the new unit.

    Shop on Amazon
  • Backup camera

    Nearly every unit here has a rear camera input — adding a camera during the install costs little extra effort.

    Shop on Amazon

Kia Seltos head unit FAQ

Will a double DIN head unit fit my Kia Seltos?

Yes — the Kia Seltos takes a standard double DIN (4-inch tall) chassis with the correct dash installation kit. The kit fills the factory opening so the new stereo looks factory-installed.

Do I need a dash kit for a Kia Seltos stereo upgrade?

Yes — a vehicle-specific dash kit is the one part you shouldn't skip. It adapts the Seltos dash opening to the standard double DIN chassis and usually costs $15–$50.

Will I keep my steering wheel controls in the Seltos?

In most cases yes, with a steering wheel control interface module wired between the car and the new unit. Budget roughly $30–$60 for it.

What screen sizes are available for the Kia Seltos?

Units listed for the Kia Seltos come with 7", 9", 10.1", 13.1" displays. Larger screens on custom-fit units are shaped to the dash, so a bigger display doesn't necessarily mean cutting or trimming.

Can I install a head unit in the Seltos myself?

A Seltos head unit swap is a common DIY job: trim removal tools, a screwdriver set, and 1–2 hours are typically enough. The wiring is plug-in when you use the right harness adapter and dash kit. If you're not comfortable removing dash trim, any car audio shop can do the physical install for a modest fee.

← All Kia modelsSearch another vehicle